Home > Products > Vertical Machining Center > VMC series
Product Overview
Technical Parameters
Applications
Electronic atlas
Vertical Machining CenterVMC series

The machine base and column basic parts apply German new mineral casting technology and casting materials.Compared with traditional cast iron,it has better vibration absorption,lower thermal expansion coefficient and lower thermal conductivity coefficient.

saddle,table and headstock apply German steel welding technology,it can help get higher rigidity,reduce moving parts weight,decrease movement inertia,as well as improve machine response speed and movement precision.


    tool magazine is placed by the side of column,it can help reduce the tool-arm suspension,guarantee tool-change stability, and avoid any tool-change failure caused by support deformation after long-time movement.bigger guide span,more reasonable overhanging ratio (1:1.1) higher spindle rigidity ,better cutting capacity

    Reserve sealing groove on the bed and column, realize water-proof by strengthening sealing joint strip; labyrinth-seal inner protection structure for X/Y axis , enclosed type inner production structure for Z-axis, to prevent the entry of iron chip coming; Extend linear for the inner protection guidance to achieve reliable long-time running.

    real-time monitor machine status,timely find and solve running faults

    high dynamic performance feed drive,acceleration speed 5ms²,axial rapid traverse speed 40mmin,shorten non-productive efficiency time by 20%.

    3-axis guides .bigger span higher stability

    Maximum guarantee the incoming air quality and air pressure stability , finally ensure long-term stable running of tool magazine.

    Spiral chip grooves embedded at both sides of the machine bed, chain type chip conveyor as standard configuration, for reasonable machine space utilization, and easier operation

Vertical Machining CenterVMC series
HY-VMC70A
HY-VMC70B
HY-VMC60B
HY-VMV60A
HY-VMC50B
HY-VMC50A
Technical parameter
stroke
X-axis
mm
Y-axis
mm
Z-axis
mm
spindle nose to table surface
mm
table
size
mm
max.load
kg
spindle
spindle taper
spindle form
standard spindle rotation speed
rpm
main motor power(30 min no stop)
kW
spindle torque(continuous)
Nm
feed
rapid traverse speed
m/min
cutting speed
m/min
acceleration
m/s²
3-axis ballscrew diameter
mm
3-axis roller linear width
mm
accuracy(ISO)
positioning accuracy
mm
repeated positioning accuracy
mm
ATC
tool magazine form
tool magazine capacity
S
size
l*w*h
mm
weight
kg
control system
HY-VMC70A
1200
700
700
150-850
1500*700
1200
BT40/BBT40
direct type
10000/12000/15000
11/15(9/11)
52.5/70(55)
32(40)/32(40)/32/(48/48/40)
20
2(5)
50*16
45
0.012
0.006
disk-type tool magazine
24
4300*3300*3200
10000
SIEMENS/HEIDENHAIN/MITSUBISHI
HY-VMC70B
1400
700
700
150-850
1500*700
1200
BT40/BBT40
direct type
10000/12000/15000
11/15(9/11)
52.5/70(55)
32(40)/32(40)/32/(48/48/40)
20
2(5)
50*16
45
0.012
0.006
disk-type tool magazine
24
4300*3300*3200
10000
SIEMENS/HEIDENHAIN/MITSUBISHI
HY-VMC60B
1100
600
600
150-750
1200*600
1000
BT40/BBT40
direct type
10000/12000/15000
11/15(9/11)
52.5/70(55)
40/40/32(40)/(48/48/40)
20
4(5)
40*16
45
0.008
0.005
disk-type tool magazine
24
4100*3010*2900
7500
SIEMENS/HEIDENHAIN/MITSUBISHI
HY-VMC60A
900
600
600
150-750
1000*600
800
BT40/BBT40
direct type
10000/12000/15000
11/15(9/11)
52.5/70(55)
40/40/32(40)/(48/48/40)
20
4(5)
40*16
45
0.008
0.005
disk-type tool magazine
24
4100*3010*2900
7500
SIEMENS/HEIDENHAIN/MITSUBISHI
HY-VMC50A
850
500
600
150-750
950*500
600
BT40/BBT40
direct type
10000/12000/15000
11/15(9/11)
52.5/70(55)
40/40/32(40)/(48/48/40)
20
4(5)
40*16
45
0.008
0.005
disk-type tool magazine
24
3900*2300*2900
6500
SIEMENS/HEIDENHAIN/MITSUBISHI
HY-VMC50A
650
500
600
150-750
750*500
500
BT40/BBT40
direct type
10000/12000/15000
11/15(9/11)
52.5/70(55)
40/40/32(40)/(48/48/40)
20
4(5)
40*16
45
0.008
0.005
disk-type tool magazine
24
3900*2300*2900
6500
SIEMENS/HEIDENHAIN/MITSUBISHI
Vertical Machining CenterVMC series
Register
User name*
Password*
Repeat password*
E-mail*
Company Name*
Name*
Phone*
Application for registration has been submitted
Please wait for administrator approval!返回
Your form submission fails!Return
The user name already exists!Return
User Login
User name
Password
Remember me
Successful login!Return
User name or password error!Return
The user is not approved!Return